|
 |
ALS5518
SILVER-MERCURY CAPSULE MIXER
This machine is a mini-equipment used in dental cure, and it's applied to blend the alloy of argentine and mercury of capsule type. By using Silver-Mercury Capsule Mixer, materials are blended in the capsules which are absolutely sealed ， ratio of the materials is accurate, cure quality is guaranteed and pervasion of mercury steam is minimized. So it can protect the doctors' health and the environment effectively.
This machine adopts computer as the core to control the timing of capsules. It also adopts vibration-proof equipment of suspended electrical machine, so that runs stably and vibration and noise of the whole machine is alleviated.
CHARACTERISTICS
1、It's applied to blend the alloy of argentine and mercury of capsule type.
2、Vibration frequency is comparatively stable and the demand of electrical power is low.
3、The machine is suspended and works stable, so vibration and noise of the whole machine is alleviated.
4、Use computer as the core of the machine, so the integration is improved and the timing is accurate.
BASICAL PARAMETERS
• Electrical power: 220 ± 10% 50Hz
• Total power: 75W
• Vibration frequency: 2800-3000(min -1 )
• Timing level ： 1-99s ± 1s
Use measure: Interval use |
| |
HALC-SERIES CURING LIGHT
This machine can be used to solidify the complex resin for solidification by visible light and served as teeth bodies repair for the oral cavity section.
This machine is controlled by microprocessor and h as the function to shift from half light to whole light; It can auto-memorize the light curing time last time the electricity is cut off; Light is stable and operation is simple within it's working voltage range.
1. Working Voltage: AC220 ± 10; Frequency: 50Hz ± 1
2. Power Consuming: ≤ 100VA
3. Halogen-Tungsten Light: 12V/75W(Type- Ⅰ ) 、 50W(Type- Ⅱ )
4. Spectrum Range : 380~540nm
5. Working Time: Leveled changeable from 10s to 60s
6. Melting Cutting: ф 5 × 20nm 2.0A
7. Solidify depth: Solidify resin depth is no less than 3.5mm in 40 seconds.
8. Working Condition:
Working Temperature: 5 ℃ ~ 40 ℃
Relative Humidity: ≤ 80% |
【top】 |
